This Simple 4 port Mining PDU designed to work with 208/240 volt @ 30 Amps industrial power. Supports up to 7.2kW of power. Provides 4 C13 ports to power up to 4 mining rigs. Cord made of 10 gauge wire with L6-30 plug type.
We created these to address a simple need of miners. Getting large amount of power to a small number of devices at a low cost. We don’t need switchable ports, or power monitoring, we can do that with our smart breakout board. So we just need a “dumb” PDU, basically a high current power strip. Tripplite makes something close in this, but at over $200 this is not economical. So we took to using some basic building blocks and built a sturdy design. 10AWG cable throughout and fully soldered connections this is built to the same or better quality of the commercial products internally.
We built this 4 Port Mining PDU with just 4 Ports to help reduce cost. What we know from mining is that commercial PDUs put 20-30 porting on them and we use 4. So we just kept it basic with 4 Ports.
For Custom needs, contact firstname.lastname@example.org.